Izdelki za jeklena jekla (116)

Versa-Link® stainless steel conveyor belt makes installing your conveyor belt quick and easy! Versa-Link’s Advanced Link Rods join the conveyor belt together in as little as 30 seconds with no tools required. Forged Edge Technology® creates an edge that is flush with the side of belt, eliminating any catch points that can damage your belt during operation. With up to 81% open area, Versa-Link® provides maximum air/liquid flow through capabilities that is great for frying, cooking, coating, and cooling applications. Versa-Link® is USDA Accepted, with a clean-in-place design that saves time during sanitation.

Compact-Grid® stainless steel conveyor belt is engineered to offer superior support for small products. The unique grid pattern provides 70% open area which makes it easy-to-clean and offers exceptional air and liquid flow-through properties for heating, cooling and coating operations. Compact-Grid’s no-slip positive drive provides the highest standard in belt tracking, which means the belt will run straight and true even under heavy loads. Joining Compact-Grid® is fast and simple, making belt installation easy.

Hand Wire Brushes_Flat Steel Wire Brushes326

Small Steel Wire Flue Brushes

A complete turnkey service for all Technical Brushes & Seals from concept through to delivery and after-sales. Please contact us for information.

Hand Wire Brushes_Steel Wire Brushes329

Brass & Steel Wire Brushes

Assorted Steel Wire Brushes

Steel Wire Long Bristled Hand Brush

Stainless steel backing strip can be filled in any materials: Polymers, wire, natural fibres, rubber, rubber inserts, animal hair or any mixtures of these products. They are available in 5mm, 8mm & 10mm stainless steel backing strip with filament lengths to suit the application. 3mtr lengths only. Aluminium or stainless steel holders are available.

Customers who use narrow width strip can increase productivity with oscillated wound coils as large as 1000kgs. The benefit of this larger wound coil is that the coil needs to be changed less frequently and therefore reduces downtime. Common uses for oscillated wound is the building industry and automotive sector, this process has been proven to increase machine output by 40% on pressing lines. Our oscillating wound is available in thicknesses 0.40-3.00mm with a width to 3.00-80mm. With a coil weight of 100kgs or coil OD 1,000,00mm and pack width optional 200/350mm. Our stainless steel oscillating wound is WAK edge dressed on wooden spools. The inside diameter is 406, 508 flash butt welding method with reannealing. The welding method is 90 degree TIG-skew tolling, seam smoothened. Marking is in accordance to client specification.

The Puff Boyz -NN DMT .5ML(400MG) Cartridge in Pear flavor is a delightful option for those seeking the psychedelic effects of DMT in a vape format. This cartridge combines the potent effects of DMT with a refreshing pear flavor, offering a unique and enjoyable experience. The cartridge is designed for ease of use, providing a smooth and consistent delivery of DMT with each puff. With its reduced price, the Puff Boyz cartridge is an affordable choice for those looking to explore the world of psychedelics. The pear flavor adds a pleasant twist to the vaping experience, making it a popular choice among users.

The Puff Boyz -NN DMT .5ML(400MG) Cartridge in Grape flavor offers a unique and potent experience for those seeking the effects of DMT in a convenient vape form. This cartridge provides a smooth and flavorful way to enjoy the psychedelic effects of DMT, known for its intense and transformative experiences. The grape flavor adds a pleasant twist to the vaping experience, making it a popular choice among users. With a reduced price, this cartridge is an affordable option for those looking to explore the world of psychedelics. The Puff Boyz cartridge is designed for easy use, allowing users to experience the effects of DMT without the need for complex preparation or equipment. This makes it an ideal choice for both beginners and experienced users looking for a reliable and enjoyable way to consume DMT.

CTT is an international high-tech enterprise that integrates research and development, production, and sales of precision parts.The company's business encompasses auto parts, new energy products, medical equipment, power equipment, industrial parts, and other fields. In the field of sheet metal processing for medical devices, CTT is renowned for its high-precision laser cutting technology, CNC bending equipment, professional die drawing technology, and high-quality welding equipment.

CTT has demonstrated outstanding expertise and an innovative spirit in the field of new energy vehicle chassis manufacturing. The company employs a range of advanced machining processes, from precision cutting and CNC bending to automated welding technology. Each step ensures high-performance and high-quality products. Additionally, professional surface treatment and precision machining of the chassis components further enhance the durability and reliability of the products. In terms of quality control, CTT has implemented a rigorous inspection process to ensure that every product meets high standards. After accurate assembly and comprehensive performance testing, CTT provides strong support for the chassis manufacturing of new energy vehicles, winning widespread trust and recognition from customers.

At Stainless Band we pride ourselves on supplying a wide range of steel strapping and boxed banding for delivery to the USA/Canada. Standard materials 0.015“ and 0.020“ thickness, other sizes can be produced to suit order requirements. Grade 304 and 316. Full Round Edges (100% safe edges). We can provide, boxed banding, oscillated banding, pancake coil and aluminium box banding as well as wing seals/closed seals in stainless steel and aluminium.

Our stainless steel banding and boxed banding is available in the following sizes in AISI 304/1.4301 and AISI 316/1.4401 with bright smooth finish BA or matt smooth finish 2B finish are available from stock. Other widths and thicknesses up to 50mm (2") are available upon request. Aluminium and Alu/Zinc banding are also available subject to size of order and availability. Certificates of conformity, showing the exact chemical composition of the material are supplied with each delivery. Coils are supplied banded on pallets and shrink wrapped. Maximum pallet weight 1500kg. Our standard boxed banding sizes are available in grades 304 & 316. Banding can be supplied with sheared, handsafe or round edge.

We stock the worlds largest selection of used stainless steel tanks. These range from 50 to 250,000 litre, and are applicable in a wide variety of industries including the beverage, food, chemical, pharmaceutical, waste, dairy and water treatment industries.

Standard level, single column easy clean procedure trolleys Quick & easy disassembly, assists thorough & deep cleaning Recycled polypropylene one-piece top & side panels, smooth surfaces & radiused edges assists cleaning (compatible with steam cleaning) Top Panel - Raised edges on three sides provide defined grab points to act as push handles, whilst an integral rim at the front contains spillages (max load 30kg) Side Panels - Incorporate runners with positive stops, preventing trays from being accidentally withdrawn (symmetrical design allows tray insertion from either side) Carerail fitted to either side to support a wide range of accessories Translucent, impact-resistant trays & dividers, smooth surfaces & radiused edges assists cleaning (compatible with steam cleaning / high temperature machine washing)

Die blanking is the initial step of the industrial inkjet printing machine, which uses a professional mold to precisely cut the raw material into the desired component shape, the mold molding process is through the precise mold and pressure action, laser welding is an efficient and accurate welding method for the inkjet machine components firmly connected together. The rivet or riveted piece is firmly pressed into the material by pressure, increasing the strength of the connection between the parts. The welding method enables precise connection between components while ensuring the strength and stability of the connection. Through the drawing and polishing operation, the rough and uneven parts of the surface are removed, and the dirt can be peeled off from the surface of the parts through the vibration effect of ultrasonic waves, ensuring the cleanliness and hygiene standards of the printer.

CTT has become a well-known supplier of nano-homogenization equipment at home and abroad with its deep technical accumulation and innovation capabilities. We not only provide high-quality products, but also provide comprehensive technical support and customized services to ensure that customers can get the most suitable solutions for their needs. Our products are widely used in many industries such as pharmaceuticals, cosmetics, food processing, nanomaterial research and development, and have won the recognition and trust of our customers. We have a team of experienced engineers and scientific researchers. They continue to explore and research to ensure that our products always maintain their leading position in the industry. Our production base is equipped with advanced manufacturing and testing equipment to ensure that every piece of equipment shipped meets the highest quality standards.

Our aluminium boxed banding is available from stock in widths from 12.70mm (1/2”) to 25.00mm (1”) wide and thickness 0.30mm (0.012”) to 0.50mm (0.020”) Standard grade 1050 HH other grades are available at request. Coils can be supplied as standard 2kg rolls or as boxed banding with safe edges. Supplied on wooden pallets and shrink-wrapped. Maximum pallet weight 1500kg. A full export service is available for worldwide supply. Aluminium wing seals in 12.70mm (1/2”), 19.05mm (3/4”) and 25.00mm (1”) sizes are also available, and are compatible with aluminium or stainless steel banding. Certificates of conformity, showing the exact chemical composition of the material are supplied with each delivery.

Winged clips and lapover clips are available from stock in AISI 304/1.4301 and AISI 316/1.4401 in the sizes below, Also available subject to size of order and availability: Aluminium clips, Alu/Zinc clips, toggle clips and expansion joints.

Health and safety is of paramount importance to all industries. Our introduction of edge rounding and dressing eliminates the sharp edge, known as a burr that occurs during the production of steel strip and coil. Our updated edge dressing machines are capable of producing both large and small quantities of stainless steel strip and coil with a kinder safer rounded edge or full round edge. We can edge dress on site to a maximum width of 150mm. Certificates of conformity, showing the exact chemical composition of the material are supplied with each delivery. We provide: Bevelled Edge - Used for spiral wound gasket production, with 90º angles. Sak - Fully Rounded Edge - Many clients require material to have a fully rounded edge (SAK). GK - Slit edge Standard material with a maximum burr 5% of the material thickness. WAK - Flat rolled edge - Many clients require material to have a deburred edge (WAK).

Our Fire Telephone System is designed to help you meet the requirements of BS5839 (Code of Practice for Emergency Voice Communications Systems. With cable fault monitoring, standby battery power supplies, provision for heavy fire resistant cabling etc. The system is also designed for easy installation, loop through cabling, easy configuration, easy operation. Reducing costs for you and your clients.

The mechanical iris is a camera aperture component inspired by the human eye's iris, designed to precisely control the amount of light transmitted. It consists of a series of staggered curved thin metal blades, and by adjusting the relative motion of these blades—either closing or expanding—the size of the central circular opening is modified, thereby precisely controlling the light transmission. This design is not only applied in the apertures of photographic equipment but also in a variety of window systems for automatic light regulation and in security systems that control light to protect sensitive equipment.